The Drag S Stoptober Edition!
Get the complete Drag S Kit (Dark Knight Edition) with additional:
- 1 x MTL Pod
- 1 x 1.2ohm PnP Coil
- 3 x 10ml E-Liquids
The 10ml e-liquids included in this kit are best paired with the supplied 1.2ohm coil. Additional 1.2ohm coils can then be purchased separately.
Please note: The lower resistance coils (0.3ohm and 0.2ohm) found in the kit itself are best paired with shortfill e-liquids due to the differing PG/VG ratio. These coils will produce a lot more vapour which can be too much for a beginner. For more info on this and the differences between e-liquids, take a look at our Beginners Guide to Vaping Blog Post.
What strength e-liquid should I choose?
The strength you require depends on previous smoking habits.
|E-Liquid Strength||Cigarettes Per Day|
|3mg||1-5 cigarettes daily|
|6mg||Up to 10 cigarettes daily|
|12mg||Up to 20 cigarettes daily|
|18mg||20+ cigarettes daily|
Powered by a single 2500mAh built-in battery, the compact Drag S can deliver between 5W and 60W of power. It is charged using the supplied USB-C cable, and has quick-charge capabilities.
Inside the Voopoo Drag S is the Gene TT chip, allowing auto-recognition of the coil, optimum wattage detecting, and super-fast 0.001-second firing. It also enables a host of other intelligent functions such as puff counter and SMART mode to remember your settings. Beginners will benefit from the SMART mode, as it identifies the best power for the coil and prevents the wattage from going too high and potentially burning the coil out quickly.
As with all Voopoo products, the Drag S is packed full of safety features such as Overtime Protection, Short-Circuit Protection, Overcharge Protection, Max Power Protection, Output Over-Current Protection, Over-Discharge Protection, Over-Temperature Protection.
In terms of function, you can choose between automatic draw, button-activated draw or both. Switch draw preference by pressing the fire button three times. The Drag S also allows you to adjust to airflow to a size that suits you. Beginners may enjoy a more restricted airflow as it will be similar to the draw of a cigarette.
The Drag S, as you would expect from Voopoo, is built with the highest quality materials. The frame is made from smooth alloy, finished with soft leather which feels great in the hand and is naturally anti-scratch, anti-perspiration and anti-fingerprint. A 0.96″ TFT screen displays all the information you need in full-colour.
The pods themselves hold 2ml of e-liquid and magnetically attach to the Drag S. Included in this Stoptober Edition kit is the MTL pod, which has a smaller tip that more closely resembles that of a traditional cigarette. These pods are compatible with Voopoo’s entire range of PNP coils.
Overall, the Drag S pod system is an ideal starter kit for someone who has never vaped before. The flavour and battery life are truly out-of-this-world.
The Pods are refillable and are compatible with Voopoo PnP coils.
- Pod Mod Design
- 5 – 60W Output Range
- 2500mAh Built-In Battery
- Advanced GENE.TT Chipset
- 2ml Refillable Pods
- Large Range of Compatible Coils
- Adjustable Triple Airflow
- VooPoo Drag S 60W Vape Device – Dark Knight Edition
- Refillable 2ml Drag S Pod
- Refillable 2ml MTL Drag S Pod
- PnP VM-1 0.3 Ohm Coil
- PnP VM-5 0.2 Ohm Coil
- PnP TR1 1.2 Ohm MTL Coil
- USB Type-C Charging Cable
- User Manual